not for new design ELM/ebm www.vishay.com vishay roederstein revision: 12-dec-12 1 document number: 25112 for technical questions, contact: aluminumcaps 1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 aluminum capacitors axial capacitors style features ? polarized aluminum electrolytic capacitors ? high cu product ? miniature size ? charge/discharge proof ? high ripple current capability ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? general purpose, industrial electronics, audio/video systems ? coupling, smoothing, filter ing, buffering and timing ? portable and mobile units ? vibration and shock resistant quick reference data description unit value nominal case size (? d x l) mm 4.5 x 10 6 x 10 to 10 x 25 rated capacitance range c r f 1.0 to 2200 capacitance tolerance % 20 rated voltage range v 6.3 to 100 category temperature range c - 40 to + 85 endurance test at u pper category temp. h 1000 useful life at 105 c and i r applied h 500 750 useful life at 85 c and i r applied h 2500 useful life at 40 c and i r applied h 70 000 shelf life at (0 v, upper category temperature) h 500 failure rate (0.8 u r , 40 c) 10 -9 /h ? 130 based on sectional specif ication iec 60384-4/en 130300 based on detailed specifications similar to cecc 30301-044, similar to din 45910 part 126, without quality assessment climatic category iec 68068 40/085/56 gpf selection chart for c r , u r > 100 v, and relevant nominal case sizes (? d x l in mm) c r (f) u r (v) 6.3 10 16 25 40 50 63 100 1.0 ? ? ????? 4.5 x 11 2.2 ? ? ????? 4.5 x 11 4.7 ? ? ????? 4.5 x 11 10 ? ELM ???? 4.5 x 11 6 x 10 22 ???? 4.5 x 11 ? 6 x 10 6.5 x 18 33 ??? 4.5 x 11 -- - - 47 ??? 4.5 x 11 6 x 10 ? 6.5 x 18 8 x 18 100 ? 4.5 x 11 ? 6 x 10 6.5 x 18 ? 8 x 18 10 x 25 220 ? 6 x 10 ? 6.5 x 18 10 x 18 ebm 10 x 25 - 470 ? 6.5 x 18 8 x 18 10 x 18 10 x 25 - - - 680 ? 8 x 18 10 x 18 10 x 25 - - - - 1000 8 x 18 10 x 18 10 x 25 - - - - - 1500 10 x 18 10 x 25 - - - - - - 2200 10 x 25 - - - - - - -
not for new design ELM/ebm www.vishay.com vishay roederstein revision: 12-dec-12 2 document number: 25112 for technical questions, contact: aluminumcaps 1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? axial style capacitors are insulated. note ? unless otherwise specified, all electrical values apply at t a = 20 c, p = 80 kpa to 106 kpa, rh = 45 % to 75 %. ordering example the following table give s the ordering number. the 16 th place of ordering code re fers to packaging for axial lead capacitors: malaebm00gd422b...ebm 2200 f 6.3 v 10 x 25 malaebm00gd422ba0w a = taped on reel malaebm00gd422bb0w b = taped ammo please see dimensions tabl e for available versions. dimensions in millimeters and available forms dimensions in millimeters, mass, packaging quantities, and ordering code nominal case size ? d x l ? d ? d max. l max. a min. b mass approx. g packaging, ending of or dering code, quantities taped on reel taped ammo code pcs. code pcs. 4.5 x 11 0.6 5 11.0 15 63.5 1.5 0.5 ..a0w 3000 ..b0w 1000 6 x 10 0.6 6.3 10.5 15 63.5 1.5 0.7 ..a0w 1000 ..b0w 1000 6.5 x 18 0.8 6.9 18.5 25 73.0 1.6 1.3 ..a0w 1000 ..b0w 1000 8 x 18 0.8 8.5 18.5 25 73.0 1.6 1.7 ..a0w 500 ..b0w 500 10 x 18 0.8 10.5 18.5 25 73.0 1.6 2.5 ..a0w 500 ..b0w 500 10 x 25 0.8 10.5 25.0 30 73.0 1.6 3.3 ..a0w 500 ..b0w 500 b l ? d ? d + l a ? d ? d electrical data symbol description u r rated voltage c r rated capacitance at 100 hz tan ? max. dissipation factor at 100 hz r esr equivalent series resistance at 100 hz (calculated from tan ? max. and c r ) z max. impedance at 10 khz i r rated alternating current (rms) at 100 hz and upper category temperature t a ambient temperature t uc upper category temperature rh relative humidity pambient pressure
not for new design ELM/ebm www.vishay.com vishay roederstein revision: 12-dec-12 3 document number: 25112 for technical questions, contact: aluminumcaps 1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical data and ordering information u r (v) c r 100 hz (f) nominal case size ? d x l (mm) tan ? 100 hz max. r esr 100 hz ( ? ) z 10 khz max. ( ? ) i r 100 hz t uc (a) catalog number mala... 6.3 1000 8 x 18 0.25 0.400 0.500 0.44 ebm00fl410bb0w 1500 10 x 18 0.25 0.270 0.320 0.56 ebm00gl415bb0w 2200 10 x 25 0.29 0.210 0.160 0.71 ebm00gd422bb0w 10 100 4.5 x 11 0.20 3.200 2.000 0.10 ELM00ba310cb0w 220 6 x 10 0.20 1.500 0.910 0.16 ebm00ck322cb0w 470 6.5 x 18 0.20 0.680 0.430 0.31 ebm00dl347cb0w 680 8 x 18 0.20 0.470 0.290 0.40 ebm00fl368cb0w 1000 10 x 18 0.20 0.320 0.200 0.55 ebm00gl410cb0w 1500 10 x 25 0.23 0.250 0.180 0.69 ebm00gd415cb0w 16 470 8 x 18 0.16 0.550 0.340 0.38 ebm00fl347db0w 680 10 x 18 0.16 0.380 0.240 0.50 ebm00gl368db0w 1000 10 x 25 0.16 0.260 0.180 0.66 ebm00gd410db0w 25 33 4.5 x 11 0.14 6.700 3.500 0.07 ELM00ba233eb0w 47 4.5 x 11 0.14 4.800 2.600 0.08 ELM00ba247eb0w 100 6 x 10 0.14 2.300 1.200 0.15 ebm00ck310eb0w 220 6.5 x 18 0.14 1.000 0.550 0.25 ebm00dl322eb0w 470 10 x 18 0.14 0.480 0.260 0.45 ebm00gl347eb0w 680 10 x 25 0.14 0.330 0.180 0.56 ebm00gd368eb0w 40 22 4.5 x 11 0.11 8.000 3.200 0.06 ELM00ba222gb0w 47 6 x 10 0.11 3.800 1.500 0.11 ebm00ck247gb0w 100 6.5 x 18 0.11 1.800 0.700 0.19 ebm00dl310gb0w 220 10 x 18 0.11 0.800 0.320 0.33 ebm00gl322gb0w 470 10 x 25 0.11 0.370 0.160 0.52 ebm00gd347gb0w 63 10 4.5 x 11 0.08 13.000 5.500 0.05 ELM00ba210jb0w 22 6 x 10 0.08 5.800 2.500 0.09 ebm00ck222jb0w 47 6.5 x 18 0.08 2.700 1.200 0.15 ebm00dl247jb0w 100 8 x 18 0.08 1.300 0.550 0.25 ebm00fl310jb0w 220 10 x 25 0.08 0.600 0.250 0.43 ebm00gd322jb0w 100 1.0 4.5 x 11 0.08 130.000 90.000 0.01 ELM00ba110lb0w 2.2 4.5 x 11 0.08 58.000 41.000 0.02 ELM00ba122lb0w 4.7 4.5 x 11 0.08 27.000 19.000 0.03 ELM00ba147lb0w 10 6 x 10 0.08 13.000 9.000 0.07 ebm00ck210lb0w 22 6.5 x 18 0.08 5.800 4.100 0.10 ebm00dl222lb0w 47 8 x 18 0.08 2.700 1.900 0.16 ebm00fl247lb0w 100 10 x 25 0.08 1.300 0.900 0.30 ebm00gd310lb0w additional electrical data parameter conditions value voltage surge voltage u r ? 100 v u s =1.15 x u r reverse voltage - u rev ? 1 v current leakage current u r ? 100 v u r , 300 s i l /a ? 0.002 x c r /f x u r /v + 3
not for new design ELM/ebm www.vishay.com vishay roederstein revision: 12-dec-12 4 document number: 25112 for technical questions, contact: aluminumcaps 1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 low temperature behaviour table for the calculation of the maximu m 10 khz impedance at low temperatures: in practical operation the lower limit of the series resistance and impedance is given by the oh mic part of the contact points and the foil resistance values. therefore it will not always be possible to achieve calculated values below 0.05 ? . lifetime table u r ? 100 v note i r 100 hz alternating current [a] at upper category temperature t uc taken from datasheet i user current [a] t a ambient temperature of capacitor [c] l lifetime multiplier regard l as a function of ambient temperature (x-axis) and of current (y-axis); use the current-axis according to the frequency t a (c) rated voltage (v) 6.3101625405063100 - 25 2100 1600 1250 680 390 375 240 200 - 40 7600 5700 3500 1870 1150 1100 650 500 interrelation between alternating current, ambient temperature, and lifetime i/i r (frequency dependent) lifetime multiplier l (depending on i/i r and t a ) frequency [hz] ambient temperature t a [c] 50 100 250 500 1000 > 2500 10 k 40 45 50 55 60 65 70 75 80 85 90 95 100 105 0 0 0 0 0 0 0 56 35 23 15 9.7 6.4 4.3 3.0 2.0 1.42 1.00 0.71 0.51 0.37 0.18 0.20 0.22 0.23 0.24 0.25 0.26 54 34 22 14 9.4 6.3 4.2 2.9 2.0 1.40 0.98 0.70 0.50 0.36 0.36 0.40 0.44 0.46 0.48 0.50 0.52 49 31 20 13 8.8 5.9 4.0 2.7 1.9 1.33 0.94 0.67 0.48 0.35 0.54 0.60 0.66 0.69 0.72 0.75 0.78 43 28 18 12 8.0 5.4 3.7 2.5 1.8 1.24 0.88 0.63 0.45 0.33 0.72 0.80 0.88 0.92 0.96 1.00 1.04 36 24 16 10 7.0 4.8 3.3 2.3 1.6 1.13 0.80 0.58 0.42 0.31 0.90 1.00 1.10 1.15 1.20 1.25 1.30 29 19 13 8.8 6.0 4.1 2.9 2.0 1.4 1.00 0.72 0.52 0.38 0.28 1.08 1.20 1.32 1.38 1.44 1.50 1.56 23 16 11 7.3 5.0 3.5 2.4 1.7 1.2 0.88 0.63 0.46 0.34 1.26 1.40 1.54 1.61 1.68 1.75 1.82 18 12 8.5 5.9 4.1 2.9 2.0 1.5 1.0 0.75 0.55 0.40 0.29 1.44 1.60 1.76 1.84 1.92 2.00 2.08 13 9.4 6.6 4.7 3.3 2.3 1.7 1.2 0.87 0.64 0.47 0.34 1.62 1.80 1.98 2.07 2.16 2.25 2.34 10 7.1 5.1 3.6 2.6 1.9 1.4 1.0 0.72 0.53 0.39 0.29 1.80 2.00 2.20 2.30 2.40 2.50 2.60 7.3 5.3 3.8 2.8 2.0 1.5 1.1 0.80 0.59 0.43 0.32 1.98 2.20 2.42 2.53 2.64 2.75 2.86 5.3 3.9 2.9 2.1 1.6 1.2 0.85 0.63 0.47 0.35 2.16 2.40 2.64 2.76 2.88 3.00 3.12 3.8 2.8 2.1 1.6 1.2 0.89 0.66 0.50 0.37 0.28 2.34 2.60 2.86 2.99 3.12 3.25 3.38 2.7 2.1 1.6 1.2 0.89 0.67 0.51 0.39 0.29 2.52 2.80 3.08 3.22 3.36 3.50 3.64 1.9 1.5 1.1 0.87 0.67 0.51 0.39 0.30 2.70 3.00 3.30 3.45 3.60 3.75 3.90 1.4 1.1 0.82 0.64 0.49 0.38 0.30 combination not permitted 2.88 3.20 3.52 3.68 3.84 4.00 4.16 0.95 0.75 0.59 0.46 0.36 0.28 3.06 3.40 3.74 3.91 4.08 4.25 4.42 0.66 0.53 0.42 0.34 3.24 3.60 3.96 4.14 4.32 4.50 4.68 0.46 0.37 3.42 3.80 4.18 4.37 4.56 4.75 4.94 0.32 z10khz ??? ?? tabular value c r f ?? ----------------------------------- =
not for new design ELM/ebm www.vishay.com vishay roederstein revision: 12-dec-12 5 document number: 25112 for technical questions, contact: aluminumcaps 1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 test procedures and requirements test procedure (quick reference) requirements name of test reference endurance iec 60384-4/ en 130300 subclause 4.13 t a = upper cat. temp.; u r applied 6.3 v ? u r ? 100 v: 1000 h t a = 85 c; u r applied u r = 6.3 v: - 40 % ??? c/c ? 25 % u r > 6.3 v: - 30 % ??? c/c ? 30 % tan ? ? 1.5 x spec. limit z ? 3 x spec. limit i l (300 s) ? spec. limit useful life cecc 30301 subclause 1.8.1 t a = 105 c; u r and i r applied; 6.3 v ? u r ? 100 v cases 4.5 x 11: 500 h cases 6 x 10 to 10 x 25: 750 h t a =85c; u r and i r applied u r = 6.3 v: - 50 % ??? c/c ? 45 % u r > 6.3 v: - 45 % ??? c/c ? 45 % tan ? ? 3 x spec. limit z ? 3 x spec. limit i l (300 s) ? spec. limit no short circuit, no open circuit total failure percentage: ?? 1 % shelf life (storage at high temperature) iec 60384-4/ en 130300 subclause 4.17 t a = upper cat. temp.; no voltage applied 6.3 v ? u r ? 100 v cases 4.5 x 11 to 10 x 25: 500 h after test: u r to be applied for 30 min 24 h to 48 h before measurement u r = 6.3 v: - 40 % ??? c/c ? 25 % u r > 6.3 v: - 30 % ??? c/c ? 30 % tan ? ? 1.5 x spec. limit z ? 3 x spec. limit i l (300 s) ? 2 x spec. limit
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
